Wi-Fi network is a superb choice unless you want to cope with wires and if you need to go your laptop to a new location. Although Wi-Fi is quite useful, some Windows 10 users reported Wi-Fi doesn’t have valid IP configuration problem message. This issue communication will prevent you from using Wi-Fi, so let’s observe how to repair it.
Wi-Fi doesn’t have valid IP configuration Issue Solutions
Here are the best ways to get rid of “Wi-Fi doesn’t have valid IP configuration” error.
Solution 1 – Reset TCP/IP
Among the simplest ways to repair the Wi-Fi doesn’t have valid IP configuration issue is by using the netsh command. To achieve that, follow these steps:
1 – Start Command Prompt as administrator. To achieve that press The Windows Key + X and choose Command Prompt (Admin) from the menu.
2 – When Command Prompt opens, type in the next lines:
netsh Winsock reset
netsh int ip reset
Close Command Prompt and restart your personal computer.
Users reported that solution usually fixes problems with IP configuration problem. However, that if you are using static IP address you’ll have to place it again. In case the previous orders didn’t work, you might like to try these orders as well:
1 – ipconfig /release
2 – ipconfig /flushdns
3 – ipconfig /renew
Solution 2 – Change wireless SSID and password
It had been reported that you can fix Wi-Fi doesn’t have valid IP configuration problem by being able to access your modem and changing the cordless SSID and security password. To achieve that, you’ll have to hook up your personal computer with your modem using Ethernet cable, gain access to your modem and change wireless SSID and security password. For additional information about how to achieve that, we strongly claim that you check your modem’s manual.
Many network issues are triggered by malware, various scripts, and bots. You could secure yourself by setting up Cyberghost (50% off on all strategies), an innovator in the VPN market. It shields your personal computer from disorders while surfing around, masks your IP address and blocks all unwanted gain access to.
Solution 3 – Established the route width to Auto
One recommended solution for the Wi-Fi doesn’t have valid IP configuration issue is to create the route width to Auto. To achieve that, follow these steps:
Press The Windows Key + X and choose Network Connections from the menu.
When Network Connections windowpane opens, right click your cordless interconnection and choose Properties from the menu. Click on the Configure button and go directly to the Advanced tab.
Locate 802.11n Route Width for group 2.4 and arranged it to Auto.
Click OK to save lots of changes.
Solution 4 – Placed your IP address manually
When you hook up to the cellular network you’re usually given an IP address. This technique for the Wi-Fi doesn’t have valid IP configuration problem is performed by DHCP. But if there’s a concern with DHCP or using its configuration, you’ll receive an IP configuration issue. One workaround that is recommended by users is to assign an IP address to your device personally. To achieve that, follow these steps:
Press The Windows Key + X and choose Network Connections.
Right click your cellular network and choose Properties from the menu.
Select Internet Protocol Version 4 (TCP/IPv4) and click on the Properties button.
When Properties screen opens, choose the Use the pursuing IP address option and enter the IP address. You need to Subnet mask and Default gateway. We used adjustments that work for our configuration, nevertheless, you might have to go into different data. Furthermore, you’ll have to type in the DNS server by hand. In our example we used Google’s Community DNS, nevertheless, you can also use 192.168.1.1 as your Preferred DNS server.
After you’re done, click on the OK button.
Additionally, you can gain access to your router and switch off DHCP and configure it to assign a static IP address to your personal computer.
Solution 5 – Change the amount of DHCP users
According to some users, you can fix the Wi-Fi doesn’t have valid IP configuration issue by increasing the amount of DHCP users. Some routers are usually limited to 50 DHCP users, which can make the Wi-Fi doesn’t have valid IP configuration issue to appear. To repair the Wi-Fi doesn’t have valid IP configuration issue you may need to gain access to your router and raise the quantity of DHCP users personally.
Users reported that after increasing the amount of DHCP users all issues were solved. To observe how to raise the quantity of DHCP users on your router, make certain to check on its manual.
Furthermore, some users also claim that you can fix the condition with IP configuration by increasing the amount of maximum cellular users. Some routers are limited by only 10 cordless users, and by increasing the utmost volume of users the problem was resolved.
Solution 6 – Execute a Clean boot
Some users declare that you can fix the Wi-Fi doesn’t have valid IP configuration issue by executing a Clean boot. Through the use of Clean boot, you’ll disable all third-party applications and services that could be interfering with your cordless connection. To execute Clean boot do the next:
Press The Windows Key + R on your keyboard and enter the msconfig. Press Enter or click OK.
When The Windows Settings window opens, go for Selective startup and uncheck the load startup items.
Head to Services tabs, check Hide all Microsoft services and click Disable all button.
Head to Startup tabs, and click Open up Task Manager.
When Task Manager opens you will see a set of startup applications. Right click each item on the list and choose Disable.
Once you disable all startup applications close Task Manager and click Apply and OK in The Windows Settings window.
Restart your personal computer.
After restarting your personal computer check if the problem is resolved. If the condition doesn’t appear, you might like to allow the impaired services and applications. From then on find the one that is triggering the Wi-Fi doesn’t have valid IP configuration issue and that means you can take it off or revise it.
Solution 7 – Remove your antivirus software
Antivirus software or firewall could hinder your Internet interconnection. If you are getting Wi-Fi doesn’t have valid IP configuration issue, you might like to temporarily remove your antivirus or firewall. Users reported that Avast and AVG antivirus can cause this matter, and after eliminating the difficult software the problem was resolved.
Moreover, 3 Tips to Solve Numlock on Startup Windows 10 Not Working Issue
Be aware that nearly every antivirus software can solve the Wi-Fi doesn’t have valid IP configuration issue. So be certain to temporarily remove all third-party antivirus tools. If getting rid of the antivirus software fixes the challenge, you can continue and set up the latest version of your antivirus or transition to another antivirus software.
We’d recommend you to change to Bitdefender 2018, which includes a lot of useful features. It optimizes your computer’s process activity, thing that may prevent you from a lot of issues that might appear when using your personal computer (including this kind of PC problems). In addition, it protects your web activity better still that the 2017 version (World’s Nr. 1 AV).
Solution 8 – Ensure that DHCP is fired up
As we earlier mentioned, DHCP manages to assign the IP addresses to devices that hook up to your network. Also, if DHCP isn’t working you might face certain problems. To make certain that DHCP is enabled, you can always troubleshoot your network interconnection by doing the next:
Open up Network Connections.
Discover your network adapter, right click it and choose Diagnose.
Await the scan to complete.
You can even place your IP address to be obtained automatically to be able to carefully turn on DHCP. This technique is comparable to the one explained previously, so be sure to use the best possible solution. Finally, you can always start DHCP from your router options in the event you converted it off previously.
Solution 9 – Uninstall your cordless adapter driver
Users declare that they were able to fix the Wi-Fi doesn’t have valid IP configuration issue by uninstalling their cordless adapter driver. To achieve that, follow these steps:
Press The Windows Key + X and choose Device Manager.
When Device Manager opens, find your cellular device, right click it and choose Uninstall.
If available, check Delete drivers software because of this device and click OK.
After the drivers are removed, restart your personal computer.
When your Laptop or computer starts off again, The Windows 10 will automatically set up the default cordless driver. In case the default driver is effective, you can continue deploying it, but if there are any problems you might have to download the latest drivers and set it up.
Take into account that updating your individuals can be an advanced procedure. If you are not careful you can cause everlasting damage to one’s body by downloading the incorrect driver’s version, therefore use extra extreme care.
We strongly suggest TweakBit’s Driver Updater (approved by Microsoft and Norton) to automatically download all the out-of-date drivers on your computer.
Disclaimer: Some top features of this tool aren’t free.
Solution 10 – Ensure that the security type matches
Sometimes issues with IP configuration can be triggered by your security type. So you have to ensure that the security type on your computer complements the security type place because of your router.
To achieve that, simply open up your router adjustments page. After that, go to the cordless section and check which kind of security has been used. From then on, ensure that your cellular adapter is using the same security type.
Solution 11: Update the drivers
If uninstalling the network drivers doesn’t work, make an effort to update the motorists to eliminate Wi-Fi doesn’t have valid IP configuration issue. Or you are not confident experimenting with drivers physically, you can certainly do it automatically with Driver Easy.
IMPORTANT: To perform Driver Easy, you need to have usage of the internet. If you cannot the usage of the internet, you may use the Offline Check feature of Driver Easy. The Offline Check out feature gives you to download and mount the network drivers easily even without internet.
Driver Easy will automatically discover your system in order to find the correct individuals for it. You don’t have to know just what system your personal computer is running, you don’t have to associated risk downloading and setting up the wrong drivers, and you don’t have to stress about making a blunder when installing.
You can upgrade your motorists automatically with either the FREE or the Expert version of Driver Easy. But with the Expert version it requires just 2 clicks (and also you get full support and a 30-day money-back guarantee):
1) Download and set up the Driver Easy.
2) Run Driver Easy and click Scan Now button. Driver Easy will scan your personal computer and identify any issue drivers. It includes the Wi-Fi doesn’t have valid IP configuration problem as well.
3) Click on the Update button next to drivers to automatically download and set up the right version of the driver. You can certainly do this with the FREE version. Or click Upgrade All to automatically download and mount the right version of all motorists that are absent or outdated on one’s body. This process involves the Pro version – you will be prompted to upgrade when you click Update All.
Solution 12: Personally established IP address
If you have a home network with several computer systems, the IP address of every computer will be automatically allocated. To fix the Wi-Fi doesn’t have valid IP configuration trouble, you can test to reset the IP using the pc that gets the network problem.
Follow these steps:
1) Start Control Panel.
2) View by Small symbols, click Network and Sharing Center.
3) Select Change adapter options in the kept pane.
4) Right-click on WiFi interconnection (In my own circumstance, the WiFi interconnection is DriverEasy.com_4G.) and click Properties.
5) Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
6) Select Utilize the pursuing IP address, then place IP address to 192.168,1.x (You could choose x to any digit amount. If you’re not sure relating to this, use 192.168,1.14.). Arranged Subnet mask to 255.255.255.0 and placed IP gateway to 192.168.1.1.
7) Under Utilize the pursuing DNS server addresses, then establish the Preferred DNS server to 220.127.116.11 and establish the Alternate DNS server to 18.104.22.168.
8) Click OK button.
Issues with Wi-Fi IP configuration can prevent you from being able to access the Internet, but hope that you were able to fix the Wi-Fi doesn’t have valid IP configuration issue after using one of our alternatives. Hope any of these Wi-Fi doesn’t have valid IP configuration solutions will serve you. If you know more solutions to eliminate the Wi-Fi doesn’t have valid IP configuration problem, share with us.